Martin MAc 500 Color Wheel 2 not responding?

Okay, I've been using Mac 500's for many years and have never ran across this issue before with other consoles I've used. I'm using a Whole Hog 3 (Not a Road Hog, iPC or Full Boar) OS is 3.1.7 (b2826) - Fixture profile is Martin/MAC 500 Gobo Scroll, to control these fixtures. What's happening is I don't have control of the Color Wheel 2. I do have control of Color Wheel 1 and all the other parameters. I'm using the Fixture 4 Library profile for these Fixtures types. This isn't the first time I've experienced this issue with the Whole Hog 3 using Fixture Library 4. I've haven't try earlier Fixture Library profiles yet.
I haven't had this issue with the Hog2 console, only on the Whole Hog 3.
. Anyone else experiencing this same issue?
If so, what's the work around?

Thanks in advance,

Darrel "Beammer" Cummins
LD/Programmer
Parents
  • 0
    Michael, I don't believe that it's a incorrect fixture mode or that the fixture settings or incorrect. In the past, I've used this ftype of ixtures a lot of times in the same mode (mode 4) and settings (Gobo set to scroll instead of fixed) without this problem.
    I have double checked the patch and mode on the actual fixtures and the same issue is occuring.
    There again this has happen before on another event and I didn't worry to much about it. But now I would like to bring it to someone there at HES to follow up on for a possible fix.

    Kindness Regards,

    Darrel "Beammer" Cummins

    D. L. C. Productions
    LD / Intelligent, Digital Lights and Media Server Programmer, Master Electrician
    29 W Avenida De Las Flores
    Thousand Oaks, AC. 91360-3116
    Cell #: (805) 377-5828

    e-mail: djcbeammer@aol.com
Reply
  • 0
    Michael, I don't believe that it's a incorrect fixture mode or that the fixture settings or incorrect. In the past, I've used this ftype of ixtures a lot of times in the same mode (mode 4) and settings (Gobo set to scroll instead of fixed) without this problem.
    I have double checked the patch and mode on the actual fixtures and the same issue is occuring.
    There again this has happen before on another event and I didn't worry to much about it. But now I would like to bring it to someone there at HES to follow up on for a possible fix.

    Kindness Regards,

    Darrel "Beammer" Cummins

    D. L. C. Productions
    LD / Intelligent, Digital Lights and Media Server Programmer, Master Electrician
    29 W Avenida De Las Flores
    Thousand Oaks, AC. 91360-3116
    Cell #: (805) 377-5828

    e-mail: djcbeammer@aol.com
Children
No Data
Related

www.etcconnect.com