hi. I update the laptop yesterday at v.3.2.0 and y try work with my usb super widget but not is safe. The outputs lose the signal, and i try return at the 3.1.9 and work normally. Somebody can helpme, i need some drivers or other files to run fine. Thanks.
It is possible the widget needs to be configured through the Network Window. You can see this on page 359 of the manual. www.flyingpig.com/support/documents/manual_en062911.pdf
Preess SETUP->NETWORK Highlight the Net Number of the DP8000 and press SETTINGS Another winodw will open, select WIDGET OUTPUTS. If a window doesn't open, you need to patch some fixtures. Select the widget number from the pop down boxes. Press OK
It is possible the widget needs to be configured through the Network Window. You can see this on page 359 of the manual. www.flyingpig.com/support/documents/manual_en062911.pdf
Preess SETUP->NETWORK Highlight the Net Number of the DP8000 and press SETTINGS Another winodw will open, select WIDGET OUTPUTS. If a window doesn't open, you need to patch some fixtures. Select the widget number from the pop down boxes. Press OK
