So after switching a recalled brand new DP8K to an older model, I was successful in getting the console conected to the DP8K. Despite the show seeming to being running with no problems, I am getting a message on the display of the DP8K that reads "SoftwareVersionMismatch". This is displayed where it would normally say Output Active. The show is running, but what does the message mean?
[QUOTE=barnes2000;55833] On a side note: This is only my second time to use a DP8000. I've noticed that these processors run way hotter than the 2K, I'm assuming they take up more amps too.
The DP2000 has a 6 watt power supply. The DP8000 has a 150 watt power supply (although it will normally draw substantially less than that).
The DP8000 has a heck of a lot more computational power than the 2000. I think we officially say it's more than 50 times the processing power, but realistically it's over 100x.
[QUOTE=barnes2000;55833] On a side note: This is only my second time to use a DP8000. I've noticed that these processors run way hotter than the 2K, I'm assuming they take up more amps too.
The DP2000 has a 6 watt power supply. The DP8000 has a 150 watt power supply (although it will normally draw substantially less than that).
The DP8000 has a heck of a lot more computational power than the 2000. I think we officially say it's more than 50 times the processing power, but realistically it's over 100x.
