I've been trying to set up a couple of color mixing faders by isolating hue and saturation to IPCB faders. Saturation works just fine, but Hue is starting at 360 and not traveling through the range until brought up to full and then runs through while it's being brought back down. Rinse, repeat. Is there a way to configure it to run in BOTH directions?
Chris- In the fixture editor it only gives me RGB and CMY values, nothing for HSI. For reference, the fixtures I'm working with are Opti Tri 30's by Elation.
Chow- You are correct, I am trying to create ICBP faders for the Hue and Saturation. Separating them wasn't so hard, I just knocked out the other attribute.
I think Chris is on the right path with the default values, they're just not available in this profile.
Chris- In the fixture editor it only gives me RGB and CMY values, nothing for HSI. For reference, the fixtures I'm working with are Opti Tri 30's by Elation.
Chow- You are correct, I am trying to create ICBP faders for the Hue and Saturation. Separating them wasn't so hard, I just knocked out the other attribute.
I think Chris is on the right path with the default values, they're just not available in this profile.
