Hello,
I have a 1 and half year old Roadhog.
Specs:
Wholehog software version: v3.2.1 (b 3186)
Road Hog Image Version : 1.8.0 - Build date : 3/31/2011
Road Hog Front Panel Driver Version: 3.0.0.58
Road Hog Front Panel Serial: 706
Road Hog Front Panel Firmware Version: 3
Road Hog Front Panel PLD Version: 1
*15" ELO touch screen w/ IOGEAR USB to VGA and a USB 2.0 hub
Had this set up for 4 months.
My Problem:
Been running V3.2.1 since it was released and no major problem.
But slowly one techs show started to crash but only once and a while.
Not sure what the crash was but then as of last week everyone's show is crashing.
As soon as you boot up the Hog the Playback would stop responding.
playback Not responding 200 -port=6600 -nodeid=1 -netnum=1
We would kill that then restart it. It would work for a bit then it would rear it ugly head again. Sometimes not for a while other times almost right away. Also the desktop would start ghosting. What I mean by Ghosting is that the cue1 on the Cue List pallet would stay on even though the List / cue has been overridden by another List. Example. Going from all fixtures Magenta, then to Blue. It happened but that display shows that they are both working still.
I have attached three pictures. Please let me know where I can send my show file to be tested.
Thank you for your time.
Dave
