(3.2.1) Bug Report: Merge data in cue, HTP faders jump to 100%

Connected USB Devices: Mini Playback Wing
Networked Devices: Server (Hog3PC on Windows 7 64bit), Console = Hog3, DP8000

Hog3 as client connected to Windows 7 laptop running Hog3PC. DP8000 for output. Mini Wing connected to Hog3.

Fader 1 on the Hog3 has the "Main" list containing the main cue and some slightly changed following cues. The main cue consists of basically all movinglights referring to the "Basis"-palette (IPCB).
On the Mini Wing I have several HTP lists (single cue, for conventionals). I change some parameters on movinglights, and merge into Fader 1, Cue 1, which is the current cue. As soon as I press ENTER, all HTP faders on the Mini Wing jump to 100% and I need to manually move them to the top and back to zero!!!!!

Of course, I should merge the data into the "Basis" palette, but sometimes I have some more cues in the sequence-list that have some slight changes from the first "basic" cue.
Parents
  • 0
    I think this is purely a multi-console bug but an ugly one at that. It sounds like the virtual fader levels for the second playback bar of Hog3PC (where there is no physical mini wing) are getting applied when you are merging on the Hog3 console (which is the opposing console). Can you confirm that this issue does or does not happen when doing the merging/updating on the Hog3PC console?
Reply
  • 0
    I think this is purely a multi-console bug but an ugly one at that. It sounds like the virtual fader levels for the second playback bar of Hog3PC (where there is no physical mini wing) are getting applied when you are merging on the Hog3 console (which is the opposing console). Can you confirm that this issue does or does not happen when doing the merging/updating on the Hog3PC console?
Children
No Data
Related

www.etcconnect.com