Hog3 PC Questions

I'm looking into getting a USB widget and transitioning my church over to a Hog3 PC based system. We're currently running Chamsys with an Enttec Pro box and 2 - 22" (1920x1080) Multitouch displays. I hear the syntax is pretty similar to the Hog consoles. Our computer is a Pentium D running Windows 7 Professional.


[LIST=1]
If I buy the USB Widget, I get full access to the software, correct?
How many USB widgets can be used in one system?
Can I use a USB midi controller (Behringer BCF2000) for playback and jog dial controls?
Will it accept touch inputs from two monitors? Does it acknowledge any two finger gestures?

Thanks for all the assistance!
Parents
  • 0
    [QUOTE=derek_vw;57499]
    If I buy the USB Widget, I get full access to the software, correct?

    You always have full acess to the software, you just can't send any signal without a FPS widget/DP, etc....


    [QUOTE=derek_vw;57499][LIST=1]
    How many USB widgets can be used in one system?
    Can I use a USB midi controller (Behringer BCF2000) for playback and jog dial controls?
    Will it accept touch inputs from two monitors? Does it acknowledge any two finger gestures?
    1 - I believe the limit for widgets is 16 universes now....any combination of single and/or super widgets to acheive this, but in all honesty if you want more than 4 universes you will be better served with a DP-8000 to take to processing load off your PC.

    2 - As long as you have a MIDI in/out device on your PC, then yes, you can use MIDI with H3PC

    3- Yes, you can use up to 4 touch screen monitors. Multi-touch is not recognized by H3PC directly.

    Hope this helps. :)
Reply
  • 0
    [QUOTE=derek_vw;57499]
    If I buy the USB Widget, I get full access to the software, correct?

    You always have full acess to the software, you just can't send any signal without a FPS widget/DP, etc....


    [QUOTE=derek_vw;57499][LIST=1]
    How many USB widgets can be used in one system?
    Can I use a USB midi controller (Behringer BCF2000) for playback and jog dial controls?
    Will it accept touch inputs from two monitors? Does it acknowledge any two finger gestures?
    1 - I believe the limit for widgets is 16 universes now....any combination of single and/or super widgets to acheive this, but in all honesty if you want more than 4 universes you will be better served with a DP-8000 to take to processing load off your PC.

    2 - As long as you have a MIDI in/out device on your PC, then yes, you can use MIDI with H3PC

    3- Yes, you can use up to 4 touch screen monitors. Multi-touch is not recognized by H3PC directly.

    Hope this helps. :)
Children
No Data
Related

www.etcconnect.com