• State Not Answered
  • Date
    bhorowitz
  • Date
  • Replies 14 replies
  • Subscribers 5 subscribers
  • Views 790 views
  • Users 0 members are here

Full Boar touch screen

I have a Full Boar with a touch screen connector that has come unplugged and has a broken wire. The wire has been repaired, but there are 2 places available to replug.

This is the right hand touch screen. Video display is fine, just no touch screen. I see the left screen connected to the far left connector. There are then 2 connectors available to its right. I don't know which one of them is correct.

I also have a road hog wing that doesn't display video. When I try to 'turn it on' in the control panel, it fails to stay selected. Happens with both output 1 or 2. Pretty sure that the cable is good, but I will test further today.

Consoles have been on an International tour for the last 2 months and have been getting bounced around a lot.

Thanks,

Bud
Parents
  • 0
    Bud

    Are you asking what hearder you plug into on the Front Panel?
    If yes then it is as follows:
    Front Panel - PL7 (will be to the right of the group of 3 by itself)
    Right Touch - PL8 (right hearder in the group of 3)
    Left Touch - PL9 (middle hearder in the group of 3)
    PL10 has nothing plugged into it.

    The Road Hog wing
    Are you hooking the wing up to the Full Boar?
    What version of software is your FB running?
    Does the monitor display 'no video signal'?
    Does the monitor have power?

    When you enable the monitor and it does not stay enabled it means the system did not see an external monitor, check the cables inside the wing.
Reply
  • 0
    Bud

    Are you asking what hearder you plug into on the Front Panel?
    If yes then it is as follows:
    Front Panel - PL7 (will be to the right of the group of 3 by itself)
    Right Touch - PL8 (right hearder in the group of 3)
    Left Touch - PL9 (middle hearder in the group of 3)
    PL10 has nothing plugged into it.

    The Road Hog wing
    Are you hooking the wing up to the Full Boar?
    What version of software is your FB running?
    Does the monitor display 'no video signal'?
    Does the monitor have power?

    When you enable the monitor and it does not stay enabled it means the system did not see an external monitor, check the cables inside the wing.
Children
No Data
Related

www.etcconnect.com