• State Not Answered
  • Date
    bhorowitz
  • Date
  • Replies 14 replies
  • Subscribers 5 subscribers
  • Views 779 views
  • Users 0 members are here

Full Boar touch screen

I have a Full Boar with a touch screen connector that has come unplugged and has a broken wire. The wire has been repaired, but there are 2 places available to replug.

This is the right hand touch screen. Video display is fine, just no touch screen. I see the left screen connected to the far left connector. There are then 2 connectors available to its right. I don't know which one of them is correct.

I also have a road hog wing that doesn't display video. When I try to 'turn it on' in the control panel, it fails to stay selected. Happens with both output 1 or 2. Pretty sure that the cable is good, but I will test further today.

Consoles have been on an International tour for the last 2 months and have been getting bounced around a lot.

Thanks,

Bud
Parents
  • 0
    Are you trying to install 3.2.0 software on the iPC?
    If yes, then you must perform a FULL INSTALL of the software.
    Insert the CD, hook up an external keyboard and reboot the desk.
    When the desk starts to boot hit F8 until the boot options menu appears, select the CD and hit any key when asked.

    Performing a full install will delete ALL show file so please back them all up on external media.

    Here is the link for the Full Install page, you must enter your consoles serial number in order to access the download. Make sure you burn an ISO cd.
    www.flyingpig.com/phpscripts/hogipc/recovery.php

    One more thing, Hog 2PC will no longer be on the desk once you install 3.2.0.
    After installing 3.2.0 I would then upgrade to 3.2.2 b3337.
    Put the MSI on a USB stick and from Launcher hit the software update button.
    The iPC will act and look more like the Full Boar and Road Hog on boot.
Reply
  • 0
    Are you trying to install 3.2.0 software on the iPC?
    If yes, then you must perform a FULL INSTALL of the software.
    Insert the CD, hook up an external keyboard and reboot the desk.
    When the desk starts to boot hit F8 until the boot options menu appears, select the CD and hit any key when asked.

    Performing a full install will delete ALL show file so please back them all up on external media.

    Here is the link for the Full Install page, you must enter your consoles serial number in order to access the download. Make sure you burn an ISO cd.
    www.flyingpig.com/phpscripts/hogipc/recovery.php

    One more thing, Hog 2PC will no longer be on the desk once you install 3.2.0.
    After installing 3.2.0 I would then upgrade to 3.2.2 b3337.
    Put the MSI on a USB stick and from Launcher hit the software update button.
    The iPC will act and look more like the Full Boar and Road Hog on boot.
Children
No Data
Related

www.etcconnect.com