• State Not Answered
  • Date
    bhorowitz
  • Date
  • Replies 14 replies
  • Subscribers 5 subscribers
  • Views 792 views
  • Users 0 members are here

Full Boar touch screen

I have a Full Boar with a touch screen connector that has come unplugged and has a broken wire. The wire has been repaired, but there are 2 places available to replug.

This is the right hand touch screen. Video display is fine, just no touch screen. I see the left screen connected to the far left connector. There are then 2 connectors available to its right. I don't know which one of them is correct.

I also have a road hog wing that doesn't display video. When I try to 'turn it on' in the control panel, it fails to stay selected. Happens with both output 1 or 2. Pretty sure that the cable is good, but I will test further today.

Consoles have been on an International tour for the last 2 months and have been getting bounced around a lot.

Thanks,

Bud
Parents
  • 0
    Got it. IPC is now OK.

    Still having Full Boar issues. When I attached connectors for touch screens as per your instructions, i had no touch screens, either right or left.

    Console now comes up with a windows error when almost done booting. I reinstalled 3.2. Console boots from the install fine, but when I reboot it, I get the windows error again. I will try to get the exact message on Tuesday when i have access to the console again.
Reply
  • 0
    Got it. IPC is now OK.

    Still having Full Boar issues. When I attached connectors for touch screens as per your instructions, i had no touch screens, either right or left.

    Console now comes up with a windows error when almost done booting. I reinstalled 3.2. Console boots from the install fine, but when I reboot it, I get the windows error again. I will try to get the exact message on Tuesday when i have access to the console again.
Children
No Data
Related

www.etcconnect.com