BUG Report: v3.2.2 (3337) 1% intensity value always present

1 - HOG 3
1 - DP8000

Loaded the latest software into two of my Hog 3 consoles. One console works fine the other indicates a 1% value on all the faders. Even the grand master will never go to DBO. It will only go to 1%. This happens with a new show or any show I load. Loaded v3.2.1 (3186) and I do not see this problem.

Serial number of the console this is happening with is 61FA3503254U.

Parents

0 Former HES Forums Member over 13 years ago

It does sound like something is going flaky. If you're comfortable working inside your console, the first thing is to check the connections to the front panel board. Make sure the power and signal connections are firmly attached.

Use a meter to check the voltages from the power supply.

From what you've described, it's more likely to be a problem with the front panel or power supply/power distro than the motherboard.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Reply

0 Former HES Forums Member over 13 years ago

It does sound like something is going flaky. If you're comfortable working inside your console, the first thing is to check the connections to the front panel board. Make sure the power and signal connections are firmly attached.

Use a meter to check the voltages from the power supply.

From what you've described, it's more likely to be a problem with the front panel or power supply/power distro than the motherboard.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Children

No Data