• State Not Answered
  • Date
    paulvanpanther
  • Date
  • Replies 12 replies
  • Subscribers 5 subscribers
  • Views 858 views
  • Users 0 members are here

Hog iPC problems - dmx output and playback process

same problem on 2.3.3 IPC.
tested with 6 JB A7 LED changin color via hue and saturation.

also the browse button in shows takes 10 sec.

Another Problem i have seen today: I can´t delete a list from any fader.
after restarting the playback it´s deleted.

The startup animation looks like an 10 fps movie:(. Are the grafik or cpu drivers incorect in this release?

no problems on the hogPC with the same show.

IPC is built in 2006.

best,
robert
Parents
  • 0
    ok will try to upload the show tommorow.

    just four info:
    no problems with an external screen without touch. Conectet via DVI to VGA
    sometimes problems with an external elo toch. Connectet via DVI to VGA
    (reboot fixes the problem)

    will also try to find the bad syntax while programming.

    @chris and billy
    thanks for the tip!! i managed to take a look into the BIOS after the show today. and voila everything is fast as i can remember bevor 3.2.x.

    spread this info out to all IPC users on the earth :D
Reply
  • 0
    ok will try to upload the show tommorow.

    just four info:
    no problems with an external screen without touch. Conectet via DVI to VGA
    sometimes problems with an external elo toch. Connectet via DVI to VGA
    (reboot fixes the problem)

    will also try to find the bad syntax while programming.

    @chris and billy
    thanks for the tip!! i managed to take a look into the BIOS after the show today. and voila everything is fast as i can remember bevor 3.2.x.

    spread this info out to all IPC users on the earth :D
Children
No Data
Related

www.etcconnect.com