Issue with Crossfading FX Rate

Hog 3.2.1

Not sure if this has been fixed in 3.2.2, but when I crossfade an effect with rate going from 5bpm to around 80bpm, the chase gets all jumpy during the cross fade. This doesn't happen if I just ramp the FX Rate by holding Choose and using the encoder, but I would rather be able to change this in a cross fade. I remember doing this in older versions and not having this problem.
Parents
  • 0
    Hey Scott,

    I assume you are working with position effects? I think this is because the effect is resetting in the second cue. This shouldn't be a new problem but is something we are looking at when we completely rework effects in the upcoming major release. If you have a show file with a good simple example that would be great to send so I can share with development what the problem looks like.
Reply
  • 0
    Hey Scott,

    I assume you are working with position effects? I think this is because the effect is resetting in the second cue. This shouldn't be a new problem but is something we are looking at when we completely rework effects in the upcoming major release. If you have a show file with a good simple example that would be great to send so I can share with development what the problem looks like.
Children
No Data
Related

www.etcconnect.com