Connecting Artistic Licence ArtNet box to Full Boar

Hi,

I think I am being a bit stupid but I am having real trouble connecting my Artistic Licence ArtNet box to the Hog. I have used this bo in the past using a Vista T2 and had no worries so I understand how the general concept works etc.

The box is connected to the hog using a cat5 cable. The hog is 'seeing' the box when I press 'set up' and 'network' and so will let me say that output 1 is subnet 1 universe 1 etc etc (I need to us 9 of the 12 availalbe outputs on the artnet box).

When I patch a fixture and want to assign the fixture to a specific universe/port on the artnet box, I am not given the option to path it there. Instead I simply get the usual DP1 option to hard patch to the desk.

any help on this please? Or is someone can write an idiots guide to patching fixtures to artnet universes for me then that would be good!

Cheers
Parents
  • 0
    The HOG will never see the Artnet Box direct.
    It will only see the DP8000
    If the first output of your Artnet Box is subnet 0 and univeres 0, then adjust this for universe 9 (like I explained above) for 10 use subnet 0 and universe 1 and so on
    This is depending on the settings of your Artnet Box
    Remember: The Fullboar can only Output 12 Univereses direct, if you need more then you will need external DP8000 In your case al least 1 extra.
Reply
  • 0
    The HOG will never see the Artnet Box direct.
    It will only see the DP8000
    If the first output of your Artnet Box is subnet 0 and univeres 0, then adjust this for universe 9 (like I explained above) for 10 use subnet 0 and universe 1 and so on
    This is depending on the settings of your Artnet Box
    Remember: The Fullboar can only Output 12 Univereses direct, if you need more then you will need external DP8000 In your case al least 1 extra.
Children
No Data
Related

www.etcconnect.com