Connecting Artistic Licence ArtNet box to Full Boar

Hi,

I think I am being a bit stupid but I am having real trouble connecting my Artistic Licence ArtNet box to the Hog. I have used this bo in the past using a Vista T2 and had no worries so I understand how the general concept works etc.

The box is connected to the hog using a cat5 cable. The hog is 'seeing' the box when I press 'set up' and 'network' and so will let me say that output 1 is subnet 1 universe 1 etc etc (I need to us 9 of the 12 availalbe outputs on the artnet box).

When I patch a fixture and want to assign the fixture to a specific universe/port on the artnet box, I am not given the option to path it there. Instead I simply get the usual DP1 option to hard patch to the desk.

any help on this please? Or is someone can write an idiots guide to patching fixtures to artnet universes for me then that would be good!

Cheers
Parents
  • 0
    Each DP8000 can handle 16 Universes
    So as you are using a Roadhog Fullboar i would suggest that you run the missing universe direct out of the Roadhog
    Then you need to assign the universe(s) in the internal DP8000
    Keep in mind that each DP needs a unique netnumber
Reply
  • 0
    Each DP8000 can handle 16 Universes
    So as you are using a Roadhog Fullboar i would suggest that you run the missing universe direct out of the Roadhog
    Then you need to assign the universe(s) in the internal DP8000
    Keep in mind that each DP needs a unique netnumber
Children
No Data

www.etcconnect.com