Bug - Color Wheel Update failure

RHFB 2.3.2
USB Keyboard
No network connection

I'm trying to build palettes using the spreadsheet,using a collection of Studio Spot 575s and Mac 2ks. I can record the CMY color just fine but when I set a color on the color wheels for the 575s they won't record or update the palette. However if I manually set the the values using the encoders everythig works.
Parents
  • 0
    Andris

    Have you merged in a fixture lately?
    It sounds like you did and are running into a bug we had in 3.2.2.

    Please do the following:
    1. Open the 'Fixture Window' then open 'Edit Fixtures'
    2. Select a unit type then select 'Sort by Function'
    3. Check the DEFAULT setting for the following: COLOR WHEELS, GOBO WHEELS, PRISM AND ANY OTHER SLOTS.
    I bet they are reading CTO or CTC - Change the default setting from CTC back to open, if asked update programming and you should be good to go.

    This has been fixed in the 3.2.3 release.
Reply
  • 0
    Andris

    Have you merged in a fixture lately?
    It sounds like you did and are running into a bug we had in 3.2.2.

    Please do the following:
    1. Open the 'Fixture Window' then open 'Edit Fixtures'
    2. Select a unit type then select 'Sort by Function'
    3. Check the DEFAULT setting for the following: COLOR WHEELS, GOBO WHEELS, PRISM AND ANY OTHER SLOTS.
    I bet they are reading CTO or CTC - Change the default setting from CTC back to open, if asked update programming and you should be good to go.

    This has been fixed in the 3.2.3 release.
Children
No Data
Related

www.etcconnect.com