Hi, Apologies if this is the wrong thread for this, I couldn't decide on the best place for it.
Got a Hog3 and separate PC setup, Got a DP8000 when the s/w did away with the DP2000 but have come across a small issue,
We're trying to use it in art-net mode, all works fine, except the output was really erratic. Then i realised it was running in 75HZ mode, I've tried to re-flash it using v 3.1.9 which i believe is the last supported version, and within the PC software, the device reads as running at 25Hz but I can't change it, and the device sits in 75hz mode irrespective of what device (console or PC) it's connected to.
Any newer devices show the DP2k as "Incompatible software version" as I'd expect (3.2.0 and above)
Could anyone please offer some advice as to what i'm doing wrong? - I was hoping to still get use from this unit.
The unit receives art-net as expected, and spits out DMX, it's just at the wrong refresh rate I believe.
Many Thanks
Dean.
