I am currently using the Road Hog Console, not the full boar, and I am in need of a way to remotely fire cues on the board. Right now I have the idea that by using the MIDI Show Control Module and using a show control software on a computer hooked up to the module that i could vnc to the computer and initiate commands on the computer to play the next cue on the board. Would something like that setup work?
If you're using a RH, you need 2 of the cables. One USB port on the RH is used for the UNO...and then ANOTHER cable goes into the PC. You connect the two MIDI ports together.
If you're just using Hog3PC, you can just use 1 to go into the PC.
If you're using a RH, you need 2 of the cables. One USB port on the RH is used for the UNO...and then ANOTHER cable goes into the PC. You connect the two MIDI ports together.
If you're just using Hog3PC, you can just use 1 to go into the PC.
