merging fixtures from uncommon library

Hey guys,

I need to pull a fixture out of the uncommon libraries into a show file that I have currently made with vl2500s. Any help on how to bring in only the fixture library that I need to add would be greatly appreciated. I believe I need to merge the fixture into the vl2500 show folder, but I am not positive on how to accomplish this. Currenly the vl2500 show only has those fixtures in the file. I want to add some Elation ELAR108 LED pars to the show file.

Thanks

Tim Woodworth
Parents
  • 0
    Hi Tim,
    On Hog III PC i would open your show that has the VL2500's in it,
    -Press setup(On the bottom of the righthand screen the toolbar will change)
    -Press shows Merge Shows
    -Press Next
    -On the Next Screen(source location)In the drop down menu at the top Locate the uncommon folder>so Hog PC>libraries>Uncommon
    -Select the uncommon folder,press next
    -Move down to Elation manufacturer,and open and you will find your fixture,select the fixture by ticking the Box and hit next.
    -The fixture will merge into your current show.

    If i were you i would make a backup or two of your current show before attemting to mege any files.
    hope this helps in some way.

    Best C
Reply
  • 0
    Hi Tim,
    On Hog III PC i would open your show that has the VL2500's in it,
    -Press setup(On the bottom of the righthand screen the toolbar will change)
    -Press shows Merge Shows
    -Press Next
    -On the Next Screen(source location)In the drop down menu at the top Locate the uncommon folder>so Hog PC>libraries>Uncommon
    -Select the uncommon folder,press next
    -Move down to Elation manufacturer,and open and you will find your fixture,select the fixture by ticking the Box and hit next.
    -The fixture will merge into your current show.

    If i were you i would make a backup or two of your current show before attemting to mege any files.
    hope this helps in some way.

    Best C
Children
No Data
Related

www.etcconnect.com