• State Not Answered
  • Date
    kestetson
  • Date
  • Replies 12 replies
  • Subscribers 5 subscribers
  • Views 746 views
  • Users 0 members are here

Full Boar networking question

I am trying to network 2 - Full Boars.

I have followed directions from this pdf: www.consoletrainer.com/pdf/networking/Enabling_DHCP_server.pdf

I can't get them to connect, and I think part of the problem is that I am missing the RESCAN button.

I am running a different version of software from this tutorial, but shouldn't this button be there?

See attached for picture and software version.

Thanks,
Kyle
Parents
  • 0
    -Coming out of Hog Net port, into a network switch. Right now I only have a 10/100 switch, but will have a gigabit tomorrow to use. Maybe that is the issue?

    The IP addresses are:
    Server: 172.31.0.1
    Client: 172.31.192.0

    The client is obtaining IP using DHCP.

    The other thing I see is I am not able to select anything in the HogNet Adapter. Should I be able to do this?

    Thanks,
    Kyle
Reply
  • 0
    -Coming out of Hog Net port, into a network switch. Right now I only have a 10/100 switch, but will have a gigabit tomorrow to use. Maybe that is the issue?

    The IP addresses are:
    Server: 172.31.0.1
    Client: 172.31.192.0

    The client is obtaining IP using DHCP.

    The other thing I see is I am not able to select anything in the HogNet Adapter. Should I be able to do this?

    Thanks,
    Kyle
Children
No Data
Related

www.etcconnect.com