• State Not Answered
  • Date
    gordo
  • Date
  • Replies 7 replies
  • Subscribers 5 subscribers
  • Views 485 views
  • Users 0 members are here

Bug(?) report

Hi guys
First off - running hog 3 (3.2.3) with DP8000 and mini wing

So, I've come across some weirdness in my showfile..I have a template page with a strobe stack on fader 9 (main board) and moles on fader 10...The stacks go something along the lines of :all, floor, front @ full.
On some songs(pages) the faders seems to jump to full, triggering either on the page change or when scrolling (using play) through the stack

On other occasions the lists don't seem to "engage", the cue will be running, but pressing the flash button doesn't bring up the intensity, but does register on the screen

It seems to happen at the same time during the show, but I'm not 100% sure on that
Parents
  • 0
    ok, this is still driving me crazy

    I've managed to track down the key to reproducing one of these issues.
    If i hold down the flash button on fader 10 while changing pages, when that list is triggered 2 songs later via comment macro the intensity jumps to full.
    This still happens even with a fm10/0 and/or a rm10 macro in that same cue

    I am seeing this behaviour both on the hog 3 and on pc. It's not something I have come across before. Doing a similar process with a new show did not seem to exhibit the same behaviour, so I am sure it's a show file specific thing.

    I've run check integrity and also opened a new show and merged the show into the new file, but still am having the same issues
Reply
  • 0
    ok, this is still driving me crazy

    I've managed to track down the key to reproducing one of these issues.
    If i hold down the flash button on fader 10 while changing pages, when that list is triggered 2 songs later via comment macro the intensity jumps to full.
    This still happens even with a fm10/0 and/or a rm10 macro in that same cue

    I am seeing this behaviour both on the hog 3 and on pc. It's not something I have come across before. Doing a similar process with a new show did not seem to exhibit the same behaviour, so I am sure it's a show file specific thing.

    I've run check integrity and also opened a new show and merged the show into the new file, but still am having the same issues
Children
No Data
Related

www.etcconnect.com