Hi All, We have just received our first shipment of Robin 1200 LEDS, I am putting together a show for next week and playing around with Mode1. patched and working no worries, got it to do most things i want it to but am having great difficulty trying to get the outer ring to go white and strobe whilst say the blue remains on the rest of the rings not strobing. kind of want the looks in lists to continue doing what ever in whatever col, then do strobe stabs thru the col on the fly from the programmer using blind or highlight or something like that to execute.. kinda got it happening with a white step effect of sorts.. Any guidence to where i am going wrong would be greatly appreciated.. on a on a RHFB. Cheers, Benny..
[QUOTE=MLorenz;60943]under "enable" you find options to change the strobe modes
module 3 on and module 3 off.... not sure how the rings are numbered
maybe this helps otherwise i would put a very fast intensity effect (step) on this ring. Hi Marc, thanks for the reply, will have a go tomorrow and see if i can get just one ring to strobe. Currently all i can get happening is all rings at once, still a little confused with the multiple 6 part lib for 1 fixture... the Iwhite step effect works ok but am strugling getting it to be constant and even strobing at high speed but figure that just means more playing around with the effect.. cheers, Benny..
[QUOTE=MLorenz;60943]under "enable" you find options to change the strobe modes
module 3 on and module 3 off.... not sure how the rings are numbered
maybe this helps otherwise i would put a very fast intensity effect (step) on this ring. Hi Marc, thanks for the reply, will have a go tomorrow and see if i can get just one ring to strobe. Currently all i can get happening is all rings at once, still a little confused with the multiple 6 part lib for 1 fixture... the Iwhite step effect works ok but am strugling getting it to be constant and even strobing at high speed but figure that just means more playing around with the effect.. cheers, Benny..
