• State Not Answered
  • Date
    Reid36325
  • Date
  • Replies 23 replies
  • Subscribers 5 subscribers
  • Views 1354 views
  • Users 0 members are here

Sloooow Rollin'

My Road Hog recently decided to take ages to go to a cue. If anything on the console is above 0s, it makes twice the time to fade. Most of the cues I have are 3s because of the venue being a church. But occasionally I and a colleague use the console to program other (more exciting) shows. Loops that are 3 step loops at .2s a pice are 2 whole seconds between cues. Release times are about 12 seconds to release.
I updated the software Sunday to 3.2.5 and it did not do anything to help. Noting to my knowledge has changed. (Default times, etc.) The actual software is just sluggish. Even when I checked integrity it took it a good 6 seconds to process it.
So...What's up? (My inside says: WHATS WRONG WITH MY BABY??)

Thanks for the help.

(This may very well be operator error done by a volunteer that somehow got really deep down in a menu and screwed something up that I simply didn't think to check, though I doubt it.)
Parents
  • 0
    When you say you did a full restore, did you use a bootable USB stick to totally reinstall, or did you use the software recovery from the hard drive?

    When you run a cue, does the cue start happening immediately after you press the go button and just takes longer than it should to run the cue? Or is there a wait between when you press go and the cue starting?

    Can you confirm that your console is a Road Hog and not a Road Hog Full Boar?

    Does your time of day clock run at the right speed (as in 12:30pm, and 5 minutes later its 12:35pm), or does that also run slowly?

    Can you bring up the timecode toolbar and try simulating timecode. Does that run at the right speed?
Reply
  • 0
    When you say you did a full restore, did you use a bootable USB stick to totally reinstall, or did you use the software recovery from the hard drive?

    When you run a cue, does the cue start happening immediately after you press the go button and just takes longer than it should to run the cue? Or is there a wait between when you press go and the cue starting?

    Can you confirm that your console is a Road Hog and not a Road Hog Full Boar?

    Does your time of day clock run at the right speed (as in 12:30pm, and 5 minutes later its 12:35pm), or does that also run slowly?

    Can you bring up the timecode toolbar and try simulating timecode. Does that run at the right speed?
Children
No Data
Related

www.etcconnect.com