• State Not Answered
  • Date
    Reid36325
  • Date
  • Replies 23 replies
  • Subscribers 5 subscribers
  • Views 1352 views
  • Users 0 members are here

Sloooow Rollin'

My Road Hog recently decided to take ages to go to a cue. If anything on the console is above 0s, it makes twice the time to fade. Most of the cues I have are 3s because of the venue being a church. But occasionally I and a colleague use the console to program other (more exciting) shows. Loops that are 3 step loops at .2s a pice are 2 whole seconds between cues. Release times are about 12 seconds to release.
I updated the software Sunday to 3.2.5 and it did not do anything to help. Noting to my knowledge has changed. (Default times, etc.) The actual software is just sluggish. Even when I checked integrity it took it a good 6 seconds to process it.
So...What's up? (My inside says: WHATS WRONG WITH MY BABY??)

Thanks for the help.

(This may very well be operator error done by a volunteer that somehow got really deep down in a menu and screwed something up that I simply didn't think to check, though I doubt it.)
Parents
  • 0
    It does seem to boot a tad slower than it used to. I thought that was just because of the 6 or 7 large show files.

    What's super strange is the programmer runs fine. If I throw something up and then clear it in the programmer it snaps right off. If the cue time or release time is 0s it snaps to, anything over that is double the speed. I don't remember if I tried clearing something with fade changes on...

    I have a IO Gear usb to vga for an external monitor, which oddly enough I couldn't get to work this morning, as well as a usb keyboard. However, I did suspect that could be a problem, since the keyboard is new-er. But when I unplugged them I had no change.

    I will get my IT buddy to help me with what we can manage and see if any of those fix the problem. The good thing is, it's a church so week to week having the cue times at a billion seconds isnt too big of a deal.

    Also, this makes me feel (frustrated of course but) good that I wasnt having a :rtfm: moment. :)

    Thanks for your help. I'll let you know of any more problems. (Or just send the dern thing in)
Reply
  • 0
    It does seem to boot a tad slower than it used to. I thought that was just because of the 6 or 7 large show files.

    What's super strange is the programmer runs fine. If I throw something up and then clear it in the programmer it snaps right off. If the cue time or release time is 0s it snaps to, anything over that is double the speed. I don't remember if I tried clearing something with fade changes on...

    I have a IO Gear usb to vga for an external monitor, which oddly enough I couldn't get to work this morning, as well as a usb keyboard. However, I did suspect that could be a problem, since the keyboard is new-er. But when I unplugged them I had no change.

    I will get my IT buddy to help me with what we can manage and see if any of those fix the problem. The good thing is, it's a church so week to week having the cue times at a billion seconds isnt too big of a deal.

    Also, this makes me feel (frustrated of course but) good that I wasnt having a :rtfm: moment. :)

    Thanks for your help. I'll let you know of any more problems. (Or just send the dern thing in)
Children
No Data
Related

www.etcconnect.com