• State Not Answered
  • Date
    Reid36325
  • Date
  • Replies 23 replies
  • Subscribers 5 subscribers
  • Views 1612 views
  • Users 0 members are here

Sloooow Rollin'

My Road Hog recently decided to take ages to go to a cue. If anything on the console is above 0s, it makes twice the time to fade. Most of the cues I have are 3s because of the venue being a church. But occasionally I and a colleague use the console to program other (more exciting) shows. Loops that are 3 step loops at .2s a pice are 2 whole seconds between cues. Release times are about 12 seconds to release.
I updated the software Sunday to 3.2.5 and it did not do anything to help. Noting to my knowledge has changed. (Default times, etc.) The actual software is just sluggish. Even when I checked integrity it took it a good 6 seconds to process it.
So...What's up? (My inside says: WHATS WRONG WITH MY BABY??)

Thanks for the help.

(This may very well be operator error done by a volunteer that somehow got really deep down in a menu and screwed something up that I simply didn't think to check, though I doubt it.)
Parents
  • 0
    Out of curiosity I replaced the battery again and unplugged the external screen and it works again. I still get the CMOS message at the startup though.

    What was strange was when I restarted it with the USB to VGA reconfigured was when it decided to go slow again. I'm no computer guy so for all I know that could be the CMOS/BIOS issue. So from what I understand, the console may be focused on the screen or otherwise rather than running cues.

    If I am in setup, I would hit F5 to restore to defaults, correct? But what is putting it back to the correct settings, exactly?
Reply
  • 0
    Out of curiosity I replaced the battery again and unplugged the external screen and it works again. I still get the CMOS message at the startup though.

    What was strange was when I restarted it with the USB to VGA reconfigured was when it decided to go slow again. I'm no computer guy so for all I know that could be the CMOS/BIOS issue. So from what I understand, the console may be focused on the screen or otherwise rather than running cues.

    If I am in setup, I would hit F5 to restore to defaults, correct? But what is putting it back to the correct settings, exactly?
Children
No Data
Related

www.etcconnect.com