• State Not Answered
  • Date
    bsbjuicer
  • Date
  • Replies 9 replies
  • Subscribers 5 subscribers
  • Views 586 views
  • Users 0 members are here

full boar hognet

Hello, anyone have an idea why the Hognet on a Road Hog Full Boar running 3.2.2 never starts on the first bootup of the console. It always takes an initial boot, then reboot (red button or on-off switch) for the Hognet to become operational. The RHFB is connected to a router and everything has static IP addresses. (the router is always fully powered before the RHFB is turned on) Hmmmmmmm.

Bryan
Parents
  • 0
    Hi Eric,
    RHFB direct connected to router. No lights on the Hognet output on the first startup, as well as IP address setting itself to the loopback address instead of the static IP address I gave it. Gigabit router. Nothing else directly connected. On second startup the Hognet lights turn on, the static IP address shows up and everything is fine. What gives?
Reply
  • 0
    Hi Eric,
    RHFB direct connected to router. No lights on the Hognet output on the first startup, as well as IP address setting itself to the loopback address instead of the static IP address I gave it. Gigabit router. Nothing else directly connected. On second startup the Hognet lights turn on, the static IP address shows up and everything is fine. What gives?
Children
No Data
Related

www.etcconnect.com