Clearing

Hey Guys,

So when I am making a cue or doing anything with a light like putting a prism in or changing a color and decide I don't like it I hit clear and start over but when I select those lights again the previous color or prism is still there like it didn't clear all the way. What might cause that? Or did I just confuse everyone?
Parents
  • 0
    Ok if you are not on the current version of software (3.2.6 or 3.2.5) you may be running into an old bug.

    Can you Launch into your show
    Open the Patch Window and hit the "Edit Fixtures" button
    Select a fixture from the list on the left side and click on the "Sort by Function" button
    Make sure that the DEFAULT value for all of your slots is "OPEN" and not CTB or CTO.

    All slots ='s gobos, color wheels, prisms
Reply
  • 0
    Ok if you are not on the current version of software (3.2.6 or 3.2.5) you may be running into an old bug.

    Can you Launch into your show
    Open the Patch Window and hit the "Edit Fixtures" button
    Select a fixture from the list on the left side and click on the "Sort by Function" button
    Make sure that the DEFAULT value for all of your slots is "OPEN" and not CTB or CTO.

    All slots ='s gobos, color wheels, prisms
Children
No Data
Related

www.etcconnect.com