Robe LED 300 Mode 1 Cell/Beam

Use the 600... Its exact the same
Same for 1200

Rather would use Mode 5, means only one fixture for Beam/Control and 3 cells. In Mode 1 you would have one fixture for control, one for beam and the 3 cells....

If not in the lib it is on the ftp-server

Thanks Marco,
I couldn't actually see the profiles on the ftp or in the standard librarys anywhere but have them now in any event.

Best C

It is on the site of ROBE:

www.robe.cz/support/file-detail/5741/file-cat/fixture-libraries/