Zoom and Iris on a fader.

Hog 3 v3.19. Is there a way way to assign Iris and Zoom to individual faders. I have movers running in a couple different lists and and want to be able to control the zoom and iris of all the fixtures together via the separate faders.
Parents
  • method 1. Zoom fader: place zoom at FULL, record cue1.
    Master options, change to Fader to IPCB fader (so other parameters not just intensity will be affected).
    When you slide fader up, it will affect zoom at the same rate you move fader. All the way up is full.
    Note: most fixtures, default zoom is at 50%. So fader will only move zoom from 50% (when fader at 0) to 100% (when fader at full). Change the fixture's default zoom level to 0% and zoom will be at 0 when fader at 0.
    OR....

    Method 2.
    If you want zoom to move between two presets that DON'T happen to be 0 and 100, you can make 2 cues. Then go to cuelist options>Master>fader= manual crossfader.
    Then moving the fader will crossfade between the two cues(presets).
Reply
  • method 1. Zoom fader: place zoom at FULL, record cue1.
    Master options, change to Fader to IPCB fader (so other parameters not just intensity will be affected).
    When you slide fader up, it will affect zoom at the same rate you move fader. All the way up is full.
    Note: most fixtures, default zoom is at 50%. So fader will only move zoom from 50% (when fader at 0) to 100% (when fader at full). Change the fixture's default zoom level to 0% and zoom will be at 0 when fader at 0.
    OR....

    Method 2.
    If you want zoom to move between two presets that DON'T happen to be 0 and 100, you can make 2 cues. Then go to cuelist options>Master>fader= manual crossfader.
    Then moving the fader will crossfade between the two cues(presets).
Children
No Data
Related