• State Not Answered
  • Date
    role82
  • Date
  • Replies 12 replies
  • Subscribers 5 subscribers
  • Views 2702 views
  • Users 0 members are here

iPC with a stabdard Windows Installation

Hello everybody.

The graphicscard in my iPC sometimes stops working. So I decided to get a new mainboard with 2 monitor outputs. The XPe image from HES won‘t work with this other mainboard. So I tried to install a standard Windows 7 and HOG3PC on top of it.
In the device manager of Windows the frontpanel, the SuperWidget and the MidiWidget show um and have all drivers installed.
And here begins my problem: The frontpanel and the SuperWidget are not available in HOG3PC. Only the MidiWidget is found.

Anyone knows how I Van get this setup to operate together?

Greetings,
Roman
Parents
  • 0
    Hi @LightingBoy,
    sounds nice. In my opinion, it looks like, the Hog3PC software is launched with parameters to get the frontpanel working, because it wouln't make sense to change the (working) drivers to different once (the vendor and product IDs would sty the same). And afaik, the RoadHog (Full Boar) also runs on XPe like the iPC. So the software wouldn't know, which frontpanel it should activate, when it just looks for embedded systems.
    But let me know anything, you figure out.

    Greetings,
    Roman
Reply
  • 0
    Hi @LightingBoy,
    sounds nice. In my opinion, it looks like, the Hog3PC software is launched with parameters to get the frontpanel working, because it wouln't make sense to change the (working) drivers to different once (the vendor and product IDs would sty the same). And afaik, the RoadHog (Full Boar) also runs on XPe like the iPC. So the software wouldn't know, which frontpanel it should activate, when it just looks for embedded systems.
    But let me know anything, you figure out.

    Greetings,
    Roman
Children
No Data
Related

www.etcconnect.com