• State Not Answered
  • +1 person also asked this people also asked this
  • Date
    ombrel - Former HES Forum Member
  • Date
  • Replies 8 replies
  • Subscribers 6 subscribers
  • Views 1843 views
  • Users 0 members are here

Trying to upgrade a Road Hog 3 fresh ISO install to v3.2.6

Hi,
I have two road hog 3 consoles with recently disks replaced to SDD's,
I've performed on both successful fresh full ISO restore (1.8.1 - ver. 3.2.1).
After a while I got back to them, to make upgrade to v3.2.6 (needed compatibility with h4 shows).
Unfortunately every attempt of running 3.2.6 msi file was returning:
"the selected software upgrade is not a valid whole hog software upgrade"
Yesterday I've managed to install "step by step", from v3.2.2 up to v3.2.4 and that's it.
Both files v3.2.5 and 3.2.6 are returning the same window:
"the selected software upgrade is not a valid whole hog software upgrade"
any thoughts?

Thanks in advance,
Chris
Parents
  • 0
    Hello,

    So Hog3 is a bit special, updating software, and getting custom fixtures is done differently than Hog4. Depending on which version you are coming from determines how you update the software. Consult the release notes for which route to update.

    Console update:


    I would recommend the most recent software version of Hog3,as it is the most reliable, and the most feature rich. That being said, if youhave any DP2000s in stock, they will only work with Hog3 V3.1.9 (B2946). If you do not anticipate the console to need to work with DP2000s I would advise being on the most recent version of Hog3 V3.2.6 (B3434)

    Hog3 Most Recent Software (Under Hog3)

    Hog3 Software Archive (Older versions)

    Hog3 Manual

    See: Section 36: Upgrading and Care of the Console for instructions on how to install software, please read them carefully, because different steps might need to be taken on different consoles, as well as from each software version the console is currently on.

    Keep in mind that a full install will completely wipe the console, any show files, or libraries on the console will be wiped, It is recommended to backup these files to external media before updating.
Reply
  • 0
    Hello,

    So Hog3 is a bit special, updating software, and getting custom fixtures is done differently than Hog4. Depending on which version you are coming from determines how you update the software. Consult the release notes for which route to update.

    Console update:


    I would recommend the most recent software version of Hog3,as it is the most reliable, and the most feature rich. That being said, if youhave any DP2000s in stock, they will only work with Hog3 V3.1.9 (B2946). If you do not anticipate the console to need to work with DP2000s I would advise being on the most recent version of Hog3 V3.2.6 (B3434)

    Hog3 Most Recent Software (Under Hog3)

    Hog3 Software Archive (Older versions)

    Hog3 Manual

    See: Section 36: Upgrading and Care of the Console for instructions on how to install software, please read them carefully, because different steps might need to be taken on different consoles, as well as from each software version the console is currently on.

    Keep in mind that a full install will completely wipe the console, any show files, or libraries on the console will be wiped, It is recommended to backup these files to external media before updating.
Children
No Data
Related

www.etcconnect.com