• State Not Answered
  • +1 person also asked this people also asked this
  • Date
    ombrel - Former HES Forum Member
  • Date
  • Replies 8 replies
  • Subscribers 6 subscribers
  • Views 3087 views
  • Users 0 members are here

Trying to upgrade a Road Hog 3 fresh ISO install to v3.2.6

Hi,
I have two road hog 3 consoles with recently disks replaced to SDD's,
I've performed on both successful fresh full ISO restore (1.8.1 - ver. 3.2.1).
After a while I got back to them, to make upgrade to v3.2.6 (needed compatibility with h4 shows).
Unfortunately every attempt of running 3.2.6 msi file was returning:
"the selected software upgrade is not a valid whole hog software upgrade"
Yesterday I've managed to install "step by step", from v3.2.2 up to v3.2.4 and that's it.
Both files v3.2.5 and 3.2.6 are returning the same window:
"the selected software upgrade is not a valid whole hog software upgrade"
any thoughts?

Thanks in advance,
Chris
Parents
  • 0
    Problem solved.
    My mistake was to use 1 pendrive to update both consoles.
    For some reason,
    2 out of 5 downloaded msi files (3.2.5 and 3.2.6) was unusable.
    After many attempts, I have found solution.
    Issue was standard Windows EFS. When file is copied to the usb stick (FAT) it stays encrypted at the destination. Such encrypted file is inaccessible on any other Windows PC (road hog) where my USB drive gets plugged in. In the end I had to use in command line "cipher /a /d" on the whole disk and it worked. Also I had to change the pendrive because the one I was using before started to loose content after move/copy files in explorer (no clue why)

    @Noah_Allen
    I did not try to install anything incompatible with the software version.
    Last known libraries are for soft version 3,2,6 and you could not use them on any previous versions.
    It was my one of the main reasons to upgrade the console.

    Chris
Reply
  • 0
    Problem solved.
    My mistake was to use 1 pendrive to update both consoles.
    For some reason,
    2 out of 5 downloaded msi files (3.2.5 and 3.2.6) was unusable.
    After many attempts, I have found solution.
    Issue was standard Windows EFS. When file is copied to the usb stick (FAT) it stays encrypted at the destination. Such encrypted file is inaccessible on any other Windows PC (road hog) where my USB drive gets plugged in. In the end I had to use in command line "cipher /a /d" on the whole disk and it worked. Also I had to change the pendrive because the one I was using before started to loose content after move/copy files in explorer (no clue why)

    @Noah_Allen
    I did not try to install anything incompatible with the software version.
    Last known libraries are for soft version 3,2,6 and you could not use them on any previous versions.
    It was my one of the main reasons to upgrade the console.

    Chris
Children
No Data
Related

www.etcconnect.com