Requests for New Fixtures in the SFML Library

Hi -

We'll add it to our list for a future library.

Thanks!

Sarah

Add to Library robe clubwash c600 ct?

I have not been able to find a fixture of this exact name on the Robe website, though there are several with roughly-similar names which are already in the v9.4.0 SFML library.

Can you please provide a copy of the fixture user manual?
- We nearly always need this as there are a lot of very similar-named fixtures out there!

You can either post a link to the PDF or equivalent, attach a PDF to a post here ("Options" tab when posting), or email a copy to your local ETC office depending on what's easiest for you.

http://www.robe.cz/fileadmin/robe/downloads/dmx_charts/ClubWash%20600%20CT%20DMX%20charts.pdf

Here is the link to clubwash 600 ct

and can you answer my question: where to prescribe lamp ignition in the user personaliti??

Thanks for the information, we will add this fixture to future SFML library update.

Unfortunately SFML User Personalities don't support the addition of Lamp Commands.

You'll need to assign the DMX offset to a parameter fader (eg User X) and set it the parameter to the right value for the command.
It may be a good idea to record a Mems fader to ignite your lamps, until we add the fixture to the proper library.

Thanks for the information, we will add this fixture to future SFML library update.

Unfortunately SFML User Personalities don't support the addition of Lamp Commands.

You'll need to assign the DMX offset to a parameter fader (eg User X) and set it the parameter to the right value for the command.
It may be a good idea to record a Mems fader to ignite your lamps, until we add the fixture to the proper library.

it is a good idea and probably the best solution of all, but if there are a lot of different types of devices with controllable lamp and what is in the library, I can not write them all together in such a mem and can not simultaneously strike the lamp team. - it is not convenient