iOS Apps

You can design your own using Touch OSC app. See screen shots below of my Touch OSC design for Smartfade ML.  I can access all memories/ Master faders etc via the pages plus memory banks page.  Touch OSC sends wifi commands to a host PC which forwards Midi commands to your Smartfade.  I run it on the same PC that is running Smartsoft with no problems.  I also set up the last memory pages (In Smartfade ML mem Bank 10, 11, 12) to have just one intensity per memory so that I can access individual dimmer or device channels: Mem Page 10 = 24 device intensity channels, Mem page 11 = Int A ch 1-24, Mem page 12 = Int B ch 1-24 (mems all mapped 1 to 1).  I also have a bigger version designed for iPad that can access all 24 faders and direct  memory page access plus stack/master controls etc.

iPhone/ iPod Touch Screenshots:

IPAD screenshots:

owww, very niice !
I'll give a try :)

thks

owww, very niice !
I'll give a try :)

thks

You can build your own Touch OSC template - if you have the time and skills with Midi programming etc - or if you want the easy way you can get my design here: https://www.dropbox.com/s/zrj13bzzrihf21c/SmartfaderPod.touchosc   Happy to share. Cheers.

I also have the iPad version if anyone wants it - let me know.

The Other way to Remote your Smartfade is to use a virtual desktop app like Splashtop or iTeleport with Smartsoft running on a PC/Mac.  This gives full access to your Smartfade /ML but can be fiddly to use.

That is very, very nice Stix!

Thanks for sharing!

Can you send me the Ipad layout please?

Richard Howey very kindly sent me these and gave us permission to host a copy on our Wiki.

You can find his TouchOSC layouts on this Wiki page.

Will TouchOSC talk right to smartsoft using the TouchOSC bridge? or do I really need to get a MIDI Controller to plug into the Smartfade ML?

You'll need a MIDI interface of some kind.

Can you Recommend a cheap one that would get the job done?

Yes please, I need one to :)

How can we connect the SmartFade software with the OSC? For this we can use a router? Or we connect the wifi mac directely to OSC ?

Can you make an tutorial?

Sorry for my english.

Best regards