• Date
    Nic Fryer
  • Date
  • Replies 3 replies
  • Subscribers 67 subscribers
  • Views 4554 views
  • Users 0 members are here

SmartFade ML & LED Lights

When I make a memory with the LEDs to go to a specific colour they will turn white before going to the colour I set. It does this even when I cross fade two memories with different colours. How do I fix this?

I am using the A & O Lighting - LED Par64......  Profile

Parents
  • Are the SFML device LED's also doing this? Are you using Rec Sel (Selected) or Rec ALL into the memories? If you put the SFML Bumps into "GO" mode then tap the bump for a memory before fading it in - does this fix your problem? Smartfade ML works on a Highest takes Precedence (HTP) system so if any other (last) active memory has higher colour settings (white is full Red Full Green Full Blue) then when you take other memories up or back down they will return/ fade back to that last active memory (white?). More info is in the Manual on page 15 about HTP and device parameters which are LTP (latest takes Precedence).
Reply
  • Are the SFML device LED's also doing this? Are you using Rec Sel (Selected) or Rec ALL into the memories? If you put the SFML Bumps into "GO" mode then tap the bump for a memory before fading it in - does this fix your problem? Smartfade ML works on a Highest takes Precedence (HTP) system so if any other (last) active memory has higher colour settings (white is full Red Full Green Full Blue) then when you take other memories up or back down they will return/ fade back to that last active memory (white?). More info is in the Manual on page 15 about HTP and device parameters which are LTP (latest takes Precedence).
Children
No Data
Related

www.etcconnect.com