'Allo!
I'm programming a Smartfade 2496 & doing the initial setups on the Smartsoft PC - and I'm having trouble patching more than 4 DMX outputs to 1 patch channel.
After 4 outputs, it gives me a + sign, but spinning the wheel doesn't allow me to add anymore - it just shows blank spaces.
(I'm patching a ton of LED pars, and they like having the dimmers on separate faders, but colors - RGB, etc - all tied together on one red fader, one green fader, etc)
I must be doing something wrong...
Helllllllp!
-N
