• Date
    Rob McDonald
  • Date
  • Replies 1 reply
  • Subscribers 67 subscribers
  • Views 1963 views
  • Users 0 members are here

One bump button has gone dark green / faded

One of the bump buttons on our Smartfade 24/48 has gone a dark green, it has in no way effecteted the board but annoys me, any suggestions ? I am guessing all the bump buttons have a little LED underneath them. Many thanks Rob McDonald

  • The bump buttons all have a Red and a Green LED under them, it sounds like your red LED has burnt out.

    Your local ETC dealer will be able to repair it, or you can contact your nearest ETC support.
    - The LED itself costs almost nowt, but it is quite fiddly to solder as it's a pretty small surface-mount device.
Related

www.etcconnect.com