• Date
    Fosse
  • Date
  • Replies 7 replies
  • Subscribers 66 subscribers
  • Views 5977 views
  • Users 0 members are here

Smartfade 1248 - adding crossfades and level range to a sequence

Hi

 

I'm trying to modify a sequence in a specific way.

I have 6 RGB LED strips using 1 channel each. I want them to do a chase, crossfading into each other and go from 50% to 100%  in intensity.

Is this possible using sequences on the smartfade 1248?

Parents
  • First build a series of looks that are stored as Memories. Then press [REC SEQ] [21] (or 22, 23, or 24). Then select the Memory bumps of the looks that you created. When you're done, press [REC SEQ] again. To change fade times, press [MENU], turn the dial to Sequences, select the sequence that you recorded, and make changes.

    To play back, press the [MEMS] button and fade up the slider of the Memory that you recorded.
Reply
  • First build a series of looks that are stored as Memories. Then press [REC SEQ] [21] (or 22, 23, or 24). Then select the Memory bumps of the looks that you created. When you're done, press [REC SEQ] again. To change fade times, press [MENU], turn the dial to Sequences, select the sequence that you recorded, and make changes.

    To play back, press the [MEMS] button and fade up the slider of the Memory that you recorded.
Children
No Data
Related

www.etcconnect.com