Smartfade 1248 - adding crossfades and level range to a sequence

Hi

 

I'm trying to modify a sequence in a specific way.

I have 6 RGB LED strips using 1 channel each. I want them to do a chase, crossfading into each other and go from 50% to 100%  in intensity.

Is this possible using sequences on the smartfade 1248?

Parents Reply Children
  • Bear with me here, I had to RTFM...

    Let's say you have channels 1>3 at 100% and channels 4>6 at 50%. You go into the Channels menu and select Adjust Chan Range. You select channels 1>6 and roll the level down to 50%. This will proportionately adjust the levels of those six channels. Channels 1>3 will end up at 50% and channels 4>6 will end up at 25%.

    Now let's say you have channels 1>3 at 100% and channels 4>6 at 50%. You go into the Channels menu and select Set Chan Range. You select channels 1>6 and roll the level down to 20%. This will set all channels in the range at 20% regardless of the level where they started.
Related