Device Commands (Lamp On / Lamp Off / Reset) does not work for my Robe ColorSpots and ColorWashes.
I used my DMX-tester to check the DMX-values. It seems that the DMX-values are correct on the right controlchannel but probably the command execution time is to short. This means that the time the DMX-value is send is to short. In the DMX-specifications for the Robe ColorSpots and ColorWashes it says "To activate following functions, stop in DMX value for at least 3 seconds". If I use the encoder for User Attribute 5 the function works perfect.
I used SmartFade ML Software Verison 1.1.0
Regards,
Nico Vellinga
Engeneer Nivell Theatertechniek
The Netherlands
Email: nivell@planet.nl
[edited by: nivell at 3:17 PM (GMT -6) on Wed, Jul 18 2007] [edited by: nivell at 3:22 AM (GMT -6) on Tue, Jul 17 2007] [edited by: nivell at 3:21 AM (GMT -6) on Tue, Jul 17 2007] [edited by: nivell at 3:15 AM (GMT -6) on Tue, Jul 17 2007] [edited by: nivell at 2:56 AM (GMT -6) on Tue, Jul 17 2007] [edited by: nivell at 2:53 AM (GMT -6) on Tue, Jul 17 2007] [edited by: nivell at 2:51 AM (GMT -6) on Tue, Jul 17 2007]
