Smartfade Indepent setup

Hi,

You can read up on how to set up independents on Page 22 of the Smartfade Manual here - http://www.etcconnect.com/docs/docs_downloads/manuals/SmartFade_v3.0_User_Manual_revA.pdf

You'll just need to go into Patch by Channel and patch the relevant addresses to i1 and/or i2, then you should be good to go. If you need to set a level for the independent you can do this in the Independents section of the Menu pages. Let us know if you have any specific questions after looking at the manual.

Graham

Hi,

You can read up on how to set up independents on Page 22 of the Smartfade Manual here - http://www.etcconnect.com/docs/docs_downloads/manuals/SmartFade_v3.0_User_Manual_revA.pdf

You'll just need to go into Patch by Channel and patch the relevant addresses to i1 and/or i2, then you should be good to go. If you need to set a level for the independent you can do this in the Independents section of the Menu pages. Let us know if you have any specific questions after looking at the manual.

Graham