I found the bug in stack edit with smartsoft. Smartsoft is first connected with smart fade. Step1. Create some memories. Step2. Record the memory to a stack. Step3. Reproduce a stack.
For example the stack step 2.
Step4. Push the Edit Mem button and choose the Stack button. Then, a memory 2 is edited. Step5. After edit finishes, push the Edit Mem button. The live output is outputted on the edited level. It is the edited level even if it reproduces a memory 2. However, when a memory 2 is seen by smartsoft Mem edit Tab, it is a level before edit. If show is saved by the smartsoft side, it is saved by the data before edit. A difference appears in the data of smart fade, and smartsoft data.
If this is read, it will return to the data before stack edit.
I hope that it is solvable.
is the Smartfade running also v3.0.2 or v3.0.1 ?
I tried by Ver3.01 and Ver3.02 both. Both were the same.
we have been able to verify this as a bug and will try and have it solved in the next update
v3.0.3. There is not a planned release date yet.
Thanks for your Assistance!
The v3.0.3 exists? I don't find on etcconnect.com...
Hi simon vost,
Unfortunately, SmartSoft was discontinued and 3.0.3 was never released. I'm afraid that this bug is still present in the last version of SmartSoft.