Fixture profile request - Chauvet SlimPar Pro series

Bump.

Is there any word on when this profile will be available?

Do you have a user manual for these particular devices? The link goes a list of a great many fixtures.

Most of this kind of LED Par are one of the Generic fixtures.

With regards to finding a suitable alternate, the complete library details can already be downloaded from our website and searched, have you had a look at this yet?

The fixture is the Chauvet SlimPar Pro RGBA, in my case.  Due to the construction of the Chauvet website, the link in my first post is the best, but it is easily navigated, as I mentioned:

http://www.chauvetlighting.com/product-manuals-literature/

Under the Club/DJ section, select the SlimPar Pro RGBA.

There is not a compatible fixture in the library for this fixture in 10-channel mode - it's much more sophisticated than a generic RGBA can.  A native profile - especially for the 10 channel mode would be greatly appreciated.

I talked to someone in your support department a couple months ago and they found that a profile had been created for Ion or Eos - I can't remember.  Having this available for the SmartFade ML would be a wonderful help.

Thanks

The fixture is the Chauvet SlimPar Pro RGBA, in my case.  Due to the construction of the Chauvet website, the link in my first post is the best, but it is easily navigated, as I mentioned:

http://www.chauvetlighting.com/product-manuals-literature/

Under the Club/DJ section, select the SlimPar Pro RGBA.

There is not a compatible fixture in the library for this fixture in 10-channel mode - it's much more sophisticated than a generic RGBA can.  A native profile - especially for the 10 channel mode would be greatly appreciated.

I talked to someone in your support department a couple months ago and they found that a profile had been created for Ion or Eos - I can't remember.  Having this available for the SmartFade ML would be a wonderful help.

Thanks

Here is the 10CH page from the manual.

I am in a bit of a hurry.  I am VERY new to both the SmartFade and the Slimpar Pro.  (They were delivered Friday.)  I know I can manually build the personality, but am having trouble becasue I have not had time to learn all the ins and outs of the console.  I will keep trying to create the personality myself, but if this is created soon I would greatly appreciate it.  The other fixtures I have were in the latest library, and that was so easy to set up.

Thanks guys.

Attached to this post is a user personality for the SlimPAR Pro RGBA fixture in 10ch mode that you can import into your show.

Dimmer Speed is on "User 1", Auto Program and Auto Program Speed are on "FX1" and "FX1 Mod" respectively.

Thank you so much for the quick response!

Thank you!