• Date
    aussiepeteee
  • Date
  • Replies 1 reply
  • Subscribers 67 subscribers
  • Views 1813 views
  • Users 0 members are here

Device Button Colour

I have used smartfademl for some time now and noticed a issue , iam curious if anyone else had same issues and possible fix.

When no devices are selected all but two buttons ( 1 and 13 ) are in there default grey colour where as other two are pale grey or pink.

1 have erased all memories, downloaded and updated software version and still there.

 

Parents

  • The "pure white" colour of the LEDs under the Device Select buttons isn't always exactly the same as LEDs always have an amount of colour variation.
    You may find that some are slightly pinker or slightly bluer.

    If you find this is distracting you, there is a menu item to calibrate the 'white point' of your Device Select buttons to get a nicer appearance.

    [Menu] > Setup > LED Calibration

    - This calibration setting will be lost if you do a deep clear or load new firmware.

Reply

  • The "pure white" colour of the LEDs under the Device Select buttons isn't always exactly the same as LEDs always have an amount of colour variation.
    You may find that some are slightly pinker or slightly bluer.

    If you find this is distracting you, there is a menu item to calibrate the 'white point' of your Device Select buttons to get a nicer appearance.

    [Menu] > Setup > LED Calibration

    - This calibration setting will be lost if you do a deep clear or load new firmware.

Children
No Data
Related

www.etcconnect.com