We have a few 575 Studio Spot and Colors that are having some type of sensor issues. Syptom; fixtures power on and home but do not strike. Display reads a 'COOL' message, however, the fixtures are not hot because they were never on. What parts do I need, what do the sensors look like, where are they located with in the fixtures? ..Thanks Much!.. and sorry, Im new to this as you can probably tell, its just kind of up to me right now to deal with.
All I have as far as spare parts is a lamp power supply board. I swapped it and still have the same problem. So I assume the problem is in fact in the logic board? Before I spend a bunch of money on that, is there anything else I should check? or maybe something on the logic board that can be replaced? Because the truth of the matter is that we have 1 Studio Color 575 & 2 Studio Spot 575 that are all experiencing the same problem right now.
All I have as far as spare parts is a lamp power supply board. I swapped it and still have the same problem. So I assume the problem is in fact in the logic board? Before I spend a bunch of money on that, is there anything else I should check? or maybe something on the logic board that can be replaced? Because the truth of the matter is that we have 1 Studio Color 575 & 2 Studio Spot 575 that are all experiencing the same problem right now.
