DMX issue

Boy, I sure inherited a good venue...

Alright. New problem.

I have a CMY Studio Spot 575, then 4 Studio Spot 250s, another CMY Studio Spot 575, and then finally a Colorpower Box before the run terminates.

Worked beautifully for a year until last week. All my movers are not listening now. The Colormergers at the end of the run are still trucking along and listening to the hog, but there is nothing out of the movers.

Ideas? Suggestions?

-scratch
Parents
  • I am running two Whole Hog 3's for these instruments. A console for live shows, and then we switch to a rack mounted unit for the daily atmosphere lighting. They are not parked and they are still there in the patch.

    All of the instruments are working and behaving fine when I go to teh instrument and use the manual controls, it is just not listening to either hog.

    I havent yet been able to get up to the instruments to try and isolate any issues yet because of continued events happening directly under the instruments every day. (ah the life of a casino...)

    I sure wish I had the budget to make individual runs for each instrument type. That would sure ease my mind for most of this room.

    Back to pecking away..

    -Scratch :trink26:
Reply
  • I am running two Whole Hog 3's for these instruments. A console for live shows, and then we switch to a rack mounted unit for the daily atmosphere lighting. They are not parked and they are still there in the patch.

    All of the instruments are working and behaving fine when I go to teh instrument and use the manual controls, it is just not listening to either hog.

    I havent yet been able to get up to the instruments to try and isolate any issues yet because of continued events happening directly under the instruments every day. (ah the life of a casino...)

    I sure wish I had the budget to make individual runs for each instrument type. That would sure ease my mind for most of this room.

    Back to pecking away..

    -Scratch :trink26:
Children
No Data
Related