• State Not Answered
  • Date
    schulz - Former HES Forum Member
  • Date
  • Replies 20 replies
  • Subscribers 17 subscribers
  • Views 3406 views
  • Users 0 members are here

Noob with a sick Technobeam

Hello all,

I just today received my very first intellegent light, a used Technobeam i made in 2001 (black stripe w/ the laser) and I am getting a LTO, LTR and Color error. I'm pretty sure from what I have read here that the corresponding motors need replacing. I was getting a FX error as well, but after rototing the FX wheel manually it started working in the Self Test.

I would prefer to send this in for repairs. I'm in Washington State near Spokane and was wondering if any of you know of a repair center close by.

I might be up to replacing the motors myself, but I have a feeling that more adjustments/repairs might need to be done to this fixture as well as a good cleaning.

Any sugestions are welcome, and I hope to be an active part of the HES forum community.

Thanks,

David Schulz
Parents
  • 0
    Be sure it is the motors by spinning the shafts of the motor. If it turns easily then it is probably not the motor. If it is stuck or hard to turn then that motor is bad. Also motors go bad from sitting for extended periods of time with lights in dusty or damp environments.
Reply
  • 0
    Be sure it is the motors by spinning the shafts of the motor. If it turns easily then it is probably not the motor. If it is stuck or hard to turn then that motor is bad. Also motors go bad from sitting for extended periods of time with lights in dusty or damp environments.
Children
No Data

www.etcconnect.com