Am currently refurbing 9 cyberlight cx, one of which will run on test mode but is not reciving dmx, desk and patch leads are ok, control board swapped, still same problem, fuse f3 ok. Any ideas Cheers Drew:confused:
Verify the logic board works in another unit and re-test. Are you seeing the green dmx light on when hooked to a controller? Put another unit on the out of the dmx too to test the dmx output chip. Understand there are 2 dmx chips, 1 on the in and 1 on the out. I prefer it if they both work..lol;)
Verify the logic board works in another unit and re-test. Are you seeing the green dmx light on when hooked to a controller? Put another unit on the out of the dmx too to test the dmx output chip. Understand there are 2 dmx chips, 1 on the in and 1 on the out. I prefer it if they both work..lol;)
