X-Spot issues

I have two issues with two different X-Spots, can anyone help?

1. I have one unit that does not power up at all (no LED, nothing).

2. I have another unit that pans past its mark during cues and actually crashes against its stop position. Sometimes it stops in the correct spot and some times it does not. Any ideas?

Mike
Parents
  • 0
    If your serious and you have the standard x-spot box's just slowly land them straight into the flightcase's which if they are rigged on a straight truss is actually quite easy.
    Drop the truss to head height tilt the x-spots,put a case under each unit and slowly drop the truss until they are in the case and release the clamps,

    if you were being funny i now feel rather silly....
Reply
  • 0
    If your serious and you have the standard x-spot box's just slowly land them straight into the flightcase's which if they are rigged on a straight truss is actually quite easy.
    Drop the truss to head height tilt the x-spots,put a case under each unit and slowly drop the truss until they are in the case and release the clamps,

    if you were being funny i now feel rather silly....
Children
No Data
Related

www.etcconnect.com