Cyberlight Strike Problem

Hey Everybody,
I'm a "Cyber Novice", thought I'd get that out there, because maybe I'm just 'missing' something...

I have 11 Cyber CL's, I have this problem with about 5 of them, when I power the fixture, it homes just fine, (and stick it in test mode) it strikes the lamp for about 5-10 seconds, then the lamp goes out, and the Lamp LED just flashes.

I can try turning the fixture on and off again, to "reset" it, and it does the same thing.

Any ideas of what could be wrong?

Thanks,
Caleb
Parents
  • 0
    This wreaks of bad Power Factor Caps. It would be the first thing I'd replace. Once removed shake it. Sounds like it's full of sand? It's bad. If the lamp strikes then dies I'm betting on the PFC if all fans work and you have clean units. If thermal was bad it wouldn't allow it to strike. PFC's = 90299010 CAPACITOR,METAL POLY 145UF 250V $88.00

    Getting to it and replacing them takes a bit of work in the cramped area.
    Part available from HES or LIghtparts.com.


Reply
  • 0
    This wreaks of bad Power Factor Caps. It would be the first thing I'd replace. Once removed shake it. Sounds like it's full of sand? It's bad. If the lamp strikes then dies I'm betting on the PFC if all fans work and you have clean units. If thermal was bad it wouldn't allow it to strike. PFC's = 90299010 CAPACITOR,METAL POLY 145UF 250V $88.00

    Getting to it and replacing them takes a bit of work in the cramped area.
    Part available from HES or LIghtparts.com.


Children
No Data
Related

www.etcconnect.com